0845 125 9409

Basket:

0 item(s) - £0.00
You have no items in your shopping basket.

0

More Views

Signet PDA200/2 Induction Loop Amplifier System

Quick Overview

The Signet PDA200/2 is the smallest of the Signet Pro Induction loop amplifiers. The loop amp is free standing but can be racked with the optional rack kit. The PDA200 /2 covers a room of up to 200m square
£230.00
The Signet PDA200/2 is the smallest of the Signet Pro Induction loop amplifiers. The loop amp is free standing but can be racked with the optional rack kit. The PDA200 /2 covers a room of up to 200m²

Features of the Signet PDA200/2
  • Ideal for theatres, cinemas, churches, conference halls and other applications where top quality sound is a must
  • Attractive free-standing design (optional wall and 19" rack mounting kits available)
  • Improved drive current capability provides up to 50% extra coverage
  • Two XLR 3 pin input sockets - one balanced mic. and one switchable balanced mic./line
  • Optional 11v phantom power available for electret or condenser microphones
  • Outreach' input allows the connection of up to 10 additional mic. or line level inputs via a series of separately available single gang connector plates
  • Adjustable level controls provided for all inputs - can be used individually or together as a three-input mixer
  • Adjustable drive control allows the loop current to be adjustable to suit a room's individual characteristics
  • Metal compensation control helps offset the frequency response problems associated with excessive metal in a building
  • True output current meter
  • Visible indication of the amplifier's compressor action via two LEDs
  • 3.5mm headphone socket allows true monitoring of the output signal

Specs of the Signet PDA200/2
  • Maximum Square Room Coverage: 200m²
  • Maximum 2:1 Aspect Ratio Coverage: 240m²
  • Inputs 1kHz: 2 x XLR (one Mic, one Mic/Line) and one Outreach connector
  • Indicators: Loop drive meter, compression (high/low), power on
  • Controls: 3 x input level controls, loop drive, metal compensation, on/off switch
  • Output Type: Current mode
  • Loop Connector: Four-way binding posts
  • Recommended Loop Impedance: 0.5 ~ 1Ω @ 1kHz. Will drive higher impedance loops with reduced area of coverage
  • Loop Drive Current @ 1Ω: 6A
  • Peak Loop Drive Current (measured over 5mS integration time0): 8 Amps @ 1Ω, 13 Amps @ 0.5Ω
  • Headphones: 3.5mm jack socket allows monitoring of the loop signal via >32Ω headphones
  • Performance: Frequency response: 20Hz ~ 14kHz ±3dB; Distortion - less than 0.5%, S/N ratio; Better than -65dB any input
  • Metal Compensation: True 3dB/octave design counteracts frequency dependent absorption by metal in the proximity of the installation over a bandwidth of approx. 100Hz ~ 10kHz
  • Dimensions: 380(W) x 80(H) x 220(D) mm
  • Weight: 3.74kg
  • Weight (Net): 3.74kg
  • Weight (Gross): 6.17kg
Manufacturer Signet