0845 125 9409

Basket:

0 item(s) - £0.00
You have no items in your shopping basket.

0

More Views

LD Systems Oxid 12A Active PA Speaker

£399.00

Quick Overview

The LD Systems Oxid 12A is an active 12" full-range speaker for compact PAs, monitoring applications, and installations with a 90° x 45° dispersion angle and a total output power of 1000 watts Peak (500 watts RMS).
The LD Systems Oxid 12A is an active 12" full-range speaker for compact PAs, monitoring applications, and installations with a 90° x 45° dispersion angle and a total output power of 1000 watts Peak (500 watts RMS).

Three selectable DSP presets optimize the frequency response of the OXID12A for various spheres of application: linear frequency response for normal operation or audio curve corrected response for low volumes or as a floor monitor. Reliable functioning is ensured by protection circuits against overcurrent and short-circuiting and a digital limiter; a switchable ground lift eliminates possible ground loop hum.

The OXID12A is loaded with a 12" neodymium woofer and a 1" ceramic HF driver that are driven separately by a high-efficiency Class D power amplifier with a switchable power supply and a Class AB power amplifier. The frequency response ranges from 50Hz - 20 kHz; the maximum sound-level pressure reaches 128 dB. The input is a combo socket (6.3 mm Jack / XLR) that is switchable to line or microphone level.

The asymmetrical cabinet with a monitor angle is made of rugged polypropylene; two handles simplify transport. There is a built-in speaker pole mount with a locking screw for speaker stands and six recessed M10 threads for flying points.

LD Systems OXID 12A Specs
  • Product number: LDOXID12A
  • Product type: PA loudspeaker
  • Type: active
  • Design: DSP controlled
  • Low/mid driver dimensions: 12"
  • Low/mid driver dimensions (mm): 305mm
  • Low/mid driver magnet: Neodymium
  • Low/mid driver brand: Custom-made
  • Low/mid driver voice coil: 2,5"
  • Low/mid driver voice coil: 63,5mm
  • Tweeter dimensions: 1"
  • Tweeter dimensions (mm): 25,4mm
  • Tweeter magnet: ceramic
  • Tweeter brand: Custom-made
  • Tweeter voice coil: 1,75"
  • Tweeter voice coil (mm): 44,4mm
  • Amplifier: Class D, Class A/B
  • Dispersion (H x V): 90 x 45
  • RMS: 500W
  • Peak power: 1000W
  • Frequency response: 50 - 20000Hz
  • Crossover frequency: 1600Hz
  • Max. SPL (continuous): 122dB
  • Max. SPL (peak): 128dB
  • Integrated media player: no
  • Protection circuits: DSP-based "look ahead" limiter, short circuit, over-current
  • Controls: DSP presets, volume, input switch (Mic / Line), ground lift, On / Off
  • Display: Power, signal, limit
  • Line inputs: 1
  • Line input connectors: XLR
  • Line outputs: 1
  • Line output connectors: XLR
  • Operating voltage: Switching Power Supply, 110 - 120 V ~ 50/60 Hz or 220 - 240 V ~ 50/60 Hz, switchable
  • Cabinet material: polypropylene
  • Cabinet construction: vented
  • Monitor angle: 45
  • Width: 396mm
  • Height: 664mm
  • Depth: 372mm
  • Weight: 18kg
  • Features: two handles, 6 x M10 flying points, switchable ground lift, 36mm flange, switchable DSP presets (monitor, flat, loudness)
Manufacturer LD Systems
Passive or Powered Powered
Ohms Rating N/A
RMS Power Rating 500w