0845 125 9409

Basket:

0 item(s) - £0.00
You have no items in your shopping basket.

0

More Views

Dynacord Powermate 600-3 Powered Mixing Desk

Quick Overview

The Dynacord Powermate 600-3 is the latest model to hit the Powermate range of powered, feature packed mixing desks. The PowerMate 600 MKIII is equipped with a professional, extremely powerful, stereo power amplifier.
OR
The Dynacord Powermate 600-3 is the latest model to hit the Powermate range of powered, feature packed mixing desks. This maybe the baby model however, the power it offers is the same as the larger models. It’s the physical size and mic inputs is where this one is smaller. The Powermate 600-3 has a total of 8 channel strips are available: 4 MIC / LINE channels, 2 MIC / Stereo USB channels ('Super Channels') and 2 stereo LINE channels. It also has all the classic features found on the larger Powermate mixers such as digital FX, speaker protection, PC Midi interface and much more

The USB DIGITAL AUDIO INTERFACE on the Dynacord Powermate 600-3 powered mixer supplies two stereo channels, present as USB 1-2 and USB 3-4 in Super Channels 5-6 and 7-8 respectively. This interface is implemented professionally in 24-bit resolution and supports sampling rates up to 96 kHz, thereby satisfying studio requirements. The USB sends are supplied with the Master L and R, AUX and MON signals. The DIGITAL AUDIO INTERFACE can be used for input and output simultaneously. Via the USB 2.0 port of your PC / Mac, four channels can be transmitted simultaneously in each direction. When a USB 1.1 interface is used, two channels can be transmitted simultaneously in each direction. The PowerMate is designed for the level of standard PCs / Macs; the gain level can easily be adjusted, if need be, from the computer connected.

The PowerMate 600-3 is equipped with a professional, extremely powerful, stereo power amplifier that uses modern and highly efficient class-D technology for audio performance of the highest quality. What this means is that at a nominal output of 2 x 1,000 watts RMS into 4 ohms (or 2 x 1,350 watts RMS into 2.7 ohms) only a comparatively small amount of heat is generated within the device, which therefore consumes considerably less electricity than a conventional power amplifier. The minimal load impedance at the output is 2.7 ohms, making operation with up to three 8-ohm loudspeaker cabinets per channel, connected in parallel, possible with no problems.

  • Channels (Mono + Stereo) - 4 + 4
  • Auxiliarys (MON, FX, AUX) - 1 Pre, 1 Post, 1 Pre/Post switchable
  • Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel into 4 Ohms - 2 x 1000W
  • Power Requirements (SMPS with auto range mains input) - 100 V to 240 V AC, 50 Hz to 60 Hz
  • Dimensions with lid (W x H x D), mm - 438.8 x 161.7 x 362.5
  • Net Weight, without lid - 9.0 kg

    Here are a few videos on the new Dynacord Powermate 600-3 Mixing desk

  • Manufacturer Dynacord
    Passive or Powered Powered
    Number of Mic Inputs 6