Dynacord PowerMate 1000 Powered Mixer Product Description
The integrated high-efficiency Class H power amplifiers deliver an impressive 2 x 700 watts into 4 ohms and an absolutely safe 2 x 870 watts into 2.66 ohms with comparatively little heat build-up. All the protective circuits with which the Dynacord 19? amplfiers are equipped are present here, including protections against overheating, short-circuits and DC voltage and HF and back EMF protection. The flow of current at power up is limited and there is a short delay before power is switched to the loudspeaker outputs. An LPN filter and a super-fast dynamic audio limiter are further Dynacord-typical features.
Two parallel and individually controlled 24-bit stereo digital effects devices with 48-bit algorithms offer a total of 2 x 99 live-optimised presets in studio quality. User-friendly Up/Down keys are used to select between room reverb, plate reverb, echo reverb, chorus reverb, mono/stereo delay, modulated delay effects (like chorus and flanger) and a large number of other special effects. Your preferred starting presets can be stored in program mode so as to be instantly available next time you switch on the device. The effects returns can be switched into or out of the signal path using either one footswitch for both of the integrated effects devices or a separate footswitch for each.
Features
Additional Information for the Dynacord PowerMate 1000 Powered Mixer
| Manufacturer | Dynacord |
| Passive or Powered | Powered |
| Number of Mic Inputs | 10 Mic Input |









