0845 125 9409

Basket:

0 item(s) - £0.00
You have no items in your shopping basket.

0

Dynacord D-Lite Sub 112

£639.00

Quick Overview

Dynacord's DLITE sub 112 is a vented, direct radiating subwoofer speaker cabinet, equipped with the high-power DYNACORD DND12S400 neodymium transducer. The conical vent system on the D-Lite Sub112 shows significantly less distortion and lower air noise at low frequencies than common circular vent openings.

Add an accessory that is related to your purchase and save. Although these accessories are related to this type of product, we always advise that you check it is specifically designed to work with the product you have chosen as this is a generic option.

£639.00
DYNACORDs SUB 112 is a vented, direct radiating cabinet, equipped with the high-power DYNACORD DND12S400 neodymium transducer. The conical vent system shows significantly less distortion and lower air noise at low frequencies than common circular vent openings.

The SUB 112 contains a passive filter, 6 dB/oct., that suppresses high frequencies. Appropriate fullrange cabinets, e.g. DYNACORDs D 8 can therefore be directly connected in parallel to the SUB 112 if an extended bass reproduction is required. You just have to connect the SUB 112 and the D 8 with a regular Speakon cable in parallel. The SUB 112 cabinet is made of 15mm birch plywood. All corner joints and braces are grooved and glued. The cabinet´s surface is painted with a 2-K laquer finish .

The acoustic foam front on a powder coated steel grille protects the SUB 112 against damage during transport and bad environmental conditions. The connector panel uses two 4-pole Speakon connectors (INPUT/THRU) for a safe connection and easy daisy-chaining to other cabinets. The pin assignment is 1+/1-. Pins 2+ and 2- are also connected between the two Speakon connectors. A pole-mount flange allows easy speaker-on-a-stick applications. Please always take care that every speaker stack has been mechanically secured against accidental falling down. Please always consult a certified structural engineer for correct and safe setup methods.

The cabinet is equipped with four large rubber feet. Two handles allow easy and safe transport. A protective cover is available as an optional accessory.

Specifications

  • Cabinet: Subwoofer
  • Configuration: Built in Hi-cut filter
  • Nominal Impedance: 8 Ohms.
  • Rated Power RMS: 400Watts
  • Program Power: 800Watts<
  • Peak Power: 1600Watts
  • SPL 2,83 V / 1m 1 W / 8 Ohm: 92 dB
  • Max. SPL 1m (calculated with peak power): 124 dB
  • Frequency range ( -10dB ): 43Hz - 350Hz
  • Passive crossover frequency: 124 Hz
  • Component SUB: DND12S400
  • Connectors Sub: 1+, 1-
  • Wired through 2+, 2-
  • Dimensions (WxHxD): 545 x 380 x 445 mm
  • Net Weight: 20kg
  • Enclosure material: Birch Plywood
  • Finish: 2 Component Paint
  • 4 Handles, 4 Castors
  • Manufacturer Dynacord
    Passive or Powered Passive