DAS PS1400 Amplifier Product Description
The D.A.S. PowerPro series of amplifiers offers a tremendous value in proven amplifier technology. The line consists of four models in rugged 1U and 2U steel chassis, engineered to meet demanding audio requirements reliably and still remain within budget.
Stereo Mode (both channels driven)
8 ohms EIA 1 kHz 1% THD : 450 W
4 ohms EIA 1 kHz 1% THD : 700 W
Bridge Mono Mode
8 ohms EIA 1 kHz 1% THD : 1400 W
Frequency Response : 20 Hz-20 kHz +/- 1 dB
Signal to Noise Ratio (20 Hz-20 kHz) : -90 dB
Distortion (SMPTE-IM) : Less than 0.5%
Bridge Mono Mode
140V or 240V : Less than 0.5%
Damping Factor @ 8 ohms : Greater than 100
Input Sensitivity @ 4 ohms : 0.775 V/1.0 V/1.44 V
Voltage Gain (input 0.775 V) : 36.7 dB
Output Circuitry : Class AB
AC Requirements : 230 V AC 50 Hz
Current Draw (1/3 power @ 230 V) : 3.4 A
Dimensions (H x W x D) : 8.8 x 48.2 x 36 cm
3.5 x 19 x 14.2 in
Weight: 21 kg (46.2 lb)
The PS-1400 is a high power stereo amplifier which incorporates a rugged 2 unit all-steel chassis ensuring structural rigidity and protecting components. The low-noise fans offer both quiet and cool operation while the high energy toroidal transformer saves weight. The amplifier incorporates rear located switches which permit ground lift, operational mode selection (bridge, stereo or parallel) and input sensitivity selection.
Additional Information for the DAS PS1400 Amplifier
| Manufacturer | D.A.S |
| Output @ 2 ohms | NA |
| Output @ 4 ohms | 2 x 700 Watts |
| Output @ 8 ohms | 2 x 450 Watts |
| Rack Height | 2u |